Featured Products

 

Triangle Spreaders

 

M&D Diamond Spreaders

 

Hammerhead V-Mowers

 

Used Equipment

 

About Us

 

Contact Us

 

(863) 494-0703 or (800) 494-0335

M&D Diamond Spreaders

Adjustable Spout and Removable Divider, S.S. Weight Box Included

3/16" S.S. Tongue

Full 24" S.S. Fans with Changeable Blades

Mid-Tech Controller Mounted in Tractor

Dual Hydraulic Sensor Valves

20 Gal per Min Pump 540 P.T.O.

Single Hydraulic Sensor Valve

Advantages:

  • The frame is made of 3/16" stainless steel front to back.

  • The hopper is made of 10 gauge slick stainless allowing the fertilizer to feed onto chain with no restriction.

  • Double bearings and case drains extend the life of the rear mounted bearings.

  • The desired metering out of fertilizer can be maintained regardless of the speed at which the spreader is traveling.

  • An oil filled stainless steel box encloses the sprocket and chain preventing any chain lock up.

  • Low and high range on the drive system is controlled by simply pulling a sliding pin, thus eliminating the handling of the roller chain.

  • A ratchet clutch is standard to prevent the chain from binding when unit is backed up.

  • Dual drive system allows for left or right distribution.

  • Fans and fins are made of 3/16" stainless with bolt-on construction for easy replacement.

  • Stainless steel weight box furnished with each unit.

  • Hydraulic drive conveyor chains available with Rawson gear boxes to accommodate computer driven systems. May be upgraded to satellite systems.

  • Replacement parts for both M&D and Triangle available at all times.

  • All spreaders can be customized to meet individual needs.

  • All spreaders are 100% American made in Arcadia, Florida.

3 TON TRACTOR-DRAWN SPREADER

5 TON TRACTOR-DRAWN SPREADER

6 TON TRUCK MOUNTED SPREADER

HEIGHT:

72"

72"

80"

WIDTH:

79"

79"

82"

FRAME:

11'

12'

12 1/2'

TANK:

15 gal hydraulic oil tank

15 gal hydraulic oil tank

20 gal hydraulic oil tank

 The tractor-drawn and truck mounted spreaders are hydraulically operated with pressure relief valves set at 1000 psi. Their conveyor chains operate from a ground wheel and there are two speed settings for more accurate control. Electronic drive on truck mounted models is available.

  In 1940, Morris Sellers began building dry fertilizer spreaders for Conibear Spreader. Around 1970, he started his own company, M&D Diamond Spreaders, with an improved design. Following his retirement in 1998, he sold his company to James L. Myers, who has extensive knowledge in spreader manufacturing. Desoto Machine Shop will continue manufacturing the M&D Diamond Spreader with the same quality and features that make this spreader unique.

  The M&D Diamond Stainless Steel Spreaders have 3/16" S.S. fans 24" wide. The sprockets and chains run in oil away from the fertilizer. The high and low range on the stainless steel mat chain is controlled by a simple pull of the handle, thus eliminating the handling of the roller chain. The unit is hydraulically driven for maximum fan speed from the external 540 pto pump. The ground wheel is also hydraulically engaged with the clutch system to prevent the conveyor chain from reversing when the unit is backed up. The hopper is made out of 3042B, 10 gauge stainless steel and the frame 3/16" stainless.

  A small tree attachment, mounted on front of the spreader, has an electronic control box to set pounds and cycle rate.

  Units available as follows:

  6 ton truck mounted with hydraulic driver or ground wheel driven.

  3 or 5 ton stainless steel tractor pull.

  Option: small tree attachment

For further information and prices, please call 1-800-494-0335.

  THANK YOU!

[Home] [Contact Us] [Shot Spreaders] [Triangle Spreaders]

Desoto Machine, Inc 2692 NE Nat Ave, Arcadia, FL 34266

(863) 494-0703 or (800) 494-0335